fibula) 등이 이에 속한다. 한쪽끝 또는 양끝에 관 절이 있다.
(2)단골(short bone);손목이나 발목을 형성하는 뼈로(수근골-carpal bone,족 근골-tarsal bone) 긴축을 이루지 않는다.
(3)종자골(sesamoid bones); 종자골은 씨앗 모양을 닮은 단골의 형태로서, 일반적으로 작고 수도 일정치 않으며 골융기나 관절과 건이 교
<Fracture>
✦정의
-뼈의 연속성이 완전 혹은 불완전하게 소실된 상태를 말한다.
-외력의 작용이 강하여 뼈가 부분적 또는 완전히 이완된 상태, 즉 뼈에 금이 가거나 부러지는 것을 말한다.
-부서진 뼈에 의해 신경이나 혈관 등이 손상 받을 수 있으며, 더욱 위급한 상황을 일으킬 수도 있다.
✦Bon
of hemorrhage
- external maxillary artery, superficial temporal artery또는 angular artery
에서는 다량의 출혈을 할 수 있으나 단순한 laceration에서의 출혈로 hypovolemic shock에 빠지지는 않는다
그러므로 shock이 발생한 경우 반드시 associated injury를 생각한다
3. shock treatment
4. evaluation of associated injury
fracture, torus fracture)
(3) 골절 면의 방향에 의한 분류
골절이 일어난 방향에 따라 횡상, 사상, 나선상. 종상골절 등으로 나눌 수 있다. 횡상 골절은 골절 면이 골의 장축에 직각을 이루면 장관 골에 직접력이 작용한 경우에 발생할 수 있으며, 슬개골이나 주관절의 주두 등에서는 간접적인 견인력에 의해
정의 - 골절이란 뼈가 부러진 상태를 뜻한다. 대부분은 외부의 힘에 의하여 뼈나 골단판 또는 관절면의 정상적인
연속성이 완전히 혹은 불완전하게 끊어진 상태를 말하며, 뼈엉성증 등 뼈조직의 병리적 변화도 원인이 되고, 골
절이 되면 주변 연부조직, 장기의 손상이 동반되게 된다.
분류는 피질골
경골과 주위 연부 조직에 가해지는 에너지와 연관된다.
6.진단적 검사결과
< 3D 판독보고서 >
11/21 - Lower Extremity Dynamic 3D CT
[ Diagnosis ]
Comminuted fracture distal tibia with possible open fracture.
< Tibia ~ Toe 판독보고서 >
11/21 - Ankle AP, Lat, Mortice Right(3)
[ Finding ]
Splint on rt lower leg.
11/21 - Long Bone Tibia AP, Lat Right(2)
of the Femoral Head, 대퇴골두무혈성괴사)
정의
고관절은 넓적다리와 골반 사이를 연결한다. 이 관절은 볼과 소켓 형태를 취하고 있는데, 대퇴골의 머리가 볼에 해당한다면, 골반 뼈 바깥에 있는 절구가 소켓 역할을 한다. 대퇴골 머리의 절반 이상이 절구 속에 파묻히고, 여기에 인대와 근육이 달라붙어 관
진단 :
Left (Longitudinal) temporal bone fracture with pneumocephalus
Hemotympanum도 동반.
5. Brain MRI
Hemotympanum Nasal bone fracture
6. Impression : Temporal bone Fx. Lt. & Pneumocephalus
7. 향후 Plan & 보호자에게 말해 줄 수 있는 Complication
Plan: Conservative Tx.
Head elevation
Sx. 좋아지지 않으면 감압술, 스
of the posterior wall of the stomach or duodenum typically produce epigastric pain, but midline back or paraspinal pain may occur if retroperitoneal extension is present.
Fatty foods are more likely to induce back pain associated with biliary disease.
Diseases of the pancreas produce back pain to the right of the spine (headof the pancreas involved) or to the left (body or tail involved)
A c
Ⅰ. INTRODUCTION
In fourth semester most of our department students attend the subject of mechanical manufacturing practice and we have made a bolt by ourselves. But the process was not a soft job. A bolt and nut is used diversely but it seemed that we don't know much about a importance and manufacture of bolts.
A bolt is a threaded fastener used in industry to make two or more mechanical